Windows phone 8.1 update and news: March 2015

Win10 preview version of a new installation, multi-system graphic tutorials
Win10 Preview 9926 how to install?
How to install Win10 Preview 9926?
Win10 download, Windows10 download, Win10 system to download, Win10 technology preview all related issues play to do, Win10 House bring you the latest news.
Win10 Technology Preview 9926 is now publicly available for download, for novice friends Detailed article about common Win10 installation method. Win10 home to remind everyone, Win10 Microsoft released a technology preview version is an informal version of the Win10 system, the purpose is to let the user experience the new features Win10, and hope to get more suggestions for improvement, so that the official version of Win10 more perfect, so in the course of inevitably there will be some bug or software compatibility problems, it is not recommended to use it to replace the Win7 / Win8.1 official version of the system currently in use, it is best to install a dual system or Win10 experience the latest features in the virtual machine. As for what has changed in this version, please refer to " Win10 Preview 9926 update in the end what? . "

Fun Windows10 system disk image four tricks:
Download the ISO, you can use the soft media Cube ( Click here to visit the official website ) in soft media master file ( download here ) to get the SHA1, MD5, CRC checksum, etc., be sure to download the original image, leaving no chance to Trojan ;
Soft media cube in soft media U disk ( click here to download ) can be made into a boot ISO U disk to install, not only eliminates the trouble of dials, you can readily share a small partner;
Soft media cube in soft media virtual drive ( download here ), you can put the ISO image directly into a virtual drive, allowing you to directly run the installation.
Soft media cube in soft media hard drive installed ( download here ), you can easily install Win7 , Win8 , Win8.1 , Win10 and other single multi-system, a key to complete, just 30 seconds!

Download:
Win10 technology preview:
- Installation Key: NKJFK-GPHP7-G8C3J-P6JXR-HQRJR (and before different, this is the latest key)
- Language version: Contains English, English (UK), Chinese (Simplified), including a total of 22 kinds of languages.
- Windows Insider beta program Register: Click here
Download List:
Chinese (Simplified) 64: Download
File size: 4.06GB
SHA-1 hash values: 39F660C94C54B07B416B47F5E8BA2AB9A8CEB593
Chinese (Simplified) 32: Download
File size: 3.13GB
SHA-1 hash values: A6691C15D59B3ED3C0ACB642CBDFF9AE4B7FB19E
===========================================
English (USA) 64: Download
File size: 3.92GB
SHA-1 hash values: 6A95316728299D95249A29FBEB9676DED23B8BEB
English (USA) 32: Download
File size: 3.01GB
SHA-1 hash values: 1AE10947CC297AE299E1C81F95812EFBB5C84121
===========================================
English (UK) 64: Download
File size: 3.92GB
SHA-1 hash values: 26DC8B6C95E9DDE0F667D6788AB4FBD03DA52F02
English (UK) 32: Download
File size: 3.01GB
SHA-1 hash values: 137196818A33DA6059FB0AC476AB400401A66BD2
===========================================
Windows 10 Enterprise Technical Preview Enterprise Edition Download
- Key: PBHCJ-Q2NYD-2PX34-T2TD6-233PK

Chinese (Simplified) 64: Download
File size: 3.95GB
Chinese (Simplified) 32: Download
File size: 3.03GB
===========================================

Note: Win10 Preview 9901 users please download the ISO image, covering the installation of upgrades! Other editions Please upgrade to 9879, and confirmed after installing KB3025380 patch, get updates via push upgrades preview update, you can directly install the upgrade coverage.
First, to replace the current system (ie the current system upgrade to Win10 Technology Preview)
After you download the image, open the ISO image (Note: you can simply double-click Win8 / 8.1 in, Win7 virtual drive to load cube available, click here to download Cube ), run directly mirror the root directory of the setup.exe, as shown below.

▲ accept the license terms

▲ Check the installation environment. This may take some time, depending on the system you are currently using the number of software

▲ After the check is complete, the installation program will list the items you need to pay attention to, such as the compatibility of system functions, such as missing or existing software. If you do not need to pay attention the results shown below appears.

▲ Here you can also change after the upgrade you want to keep the content. Click the "Change you want to keep content" appear under the map content

▲ Select the item you want to keep.
Note that regardless of which option you choose, after upgrading the current system will be replaced Win10 technology preview. One of the "personal files" refers to the "User" folder contents under; exactly which applications can be reserved in Win10 compatibility of these applications depends on the preview version; if you select "Do not keep any content," after the upgrade "personal files" still be saved, moved to a folder called Windows.old.
Click Next to start the installation, if you choose to keep all the content upgrade, which will likely be a very time consuming process.

The disadvantage is that this process can not perform the installation format (ie clean install). If you want to perform the installation format, please refer to three.
Second, the easiest way to compose multi-system (keeping the existing system)
First we need to prepare a partition for Win10 preview. Anyone with enough space partitions are eligible, but still recommended to prepare a clean single partition, if after the experience you want to delete, separate partition can avoid some trouble.
Subdivision:
Open Disk Management, find a larger partition the remaining space, right-click to select "Compress Volume":

▲ Enter the appropriate size (here as a demonstration only 30GB of space allocation, it is recommended not less than 40GB), click on the "compression." Then there will be an unallocated space behind the partition of your choice.

▲ unallocated space on the right-click and select "New Simple Volume", then all the way to the window that appears click on the "Next" button. Note that if you need to convert a hard disk prompted a dynamic disk, it is because your hard drive is the MBR partition structure, the number of primary partition has exceeded the maximum limit of the partition type - 4, then please give up partitioning.
Installation:
After you download the image, open the ISO image (Note: Win8 / 8.1 double-clicking directly, Win7 virtual drive to load cube available, click here to download Cube ), run the following sources folder setup.exe, as shown below.

▲ lower right corner of the new show "evaluation copy .Build 9926" word

▲ accept the license terms

▲ Select "Custom"

▲ Select the partition just good points here for J partition, click "Next" to start the installation.

Hopefully, after the installation is complete, the system automatically compose more. Will provide multi-system boot selection menu.
Disadvantage of this method is that the system does not allow cross-architecture installation. For example, you can not use this method to install the 64-bit systems in 32-bit systems. If you want to install the 64-bit Win10 preview at 32 system, refer to three.
Third, some common installation method (single-system, multi-system no matter how you choose, the method described above limitation does not exist)
It is recommended U-disk installation method and traditional UEFI BIOS supports two modes. After downloading the image, install Cube ( click to download ), the cube "Application bible" find cube U disk, as shown below

According to the figure suggests that only need to select a good U disk (be sure to look carefully, do not choose the wrong!) And after image, click on the "start making" button.
NOTE: If you are prompted to destroy U disk data, make sure that U disk is not wrong, the point can be determined.
Make a good boot disk, restart the computer. Choose from a USB boot to enter the installation environment. Generally have a choice brand of boot media shortcuts, these shortcuts, etc. usually F12 boot after the brand logo shortcut keys, and then in the list that appears, select Removable USB or a similar option to boot from USB, as shown below

If you can not find shortcuts, you can brand logo appears on the display when the press DEL, F2, ESC and other keys to enter the BIOS setup screen, find the Boot settings option in the BIOS setup, the USB or Removable option is set to first boot option Finally, press F10 to save and exit. Specific operation shown below. Note that there are differences in computer operation method fails, you can search the Internet search a corresponding model method of operation.

▲ Select Start settings (Boot configuration) option.

▲ After entering the setup options, select boot priority settings option.

▲ adjustment USB device (Removable Dev.) As the first boot device

▲ After setting. Press F10, select "OK" to save the settings and reboot.

▲ to enter the installation environment after the restart again. Follow the prompts.
Four, just 30 seconds! Detailed hard disk installation method:
▼ Open soft media cube ( download here ), find the "soft media hard disk installed" in the main interface, you can use the search or the lower right corner of the encyclopedia, easy to find.

▼ soft media hard disk installed Detailed specific installation methods:
① "image file path": First select the downloaded ISO image file system, where we have chosen is "Windows10_TechnicalPreview_x64_ZH-CN_9926.ISO" file;
② "image decompression position": You can select any one of the non-system partition, and the remaining available space in more than 5GB letter;
③ "Additional soft media cube": It is recommended to select "Yes" in the system can be easily installed, using the "Software Manager" to facilitate the installation of software, a key shield plug. You can also set the master, as well as clean-up optimization guru guru, easy to adjust and maintain the system. Of course, you can also select "No", or completely uninstall after installation is complete;
④ "Startup Items Description": a startup item name that appears after the system reboots, the default is "soft media installation mode" can be freely modified for your favorite word.

⑤ Finally, click "Start installed" button: Click the button to the bottom right corner of the last, wait for the progress to complete and confirm the restart in the pop-up window on it.

▲ After the second choice, you can enter the system installation interface.
Detailed installation process, please refer to the foregoing description.
Small Tips:
1, because the mirror will extract to the root directory of the drive letter selected above, it will produce a lot of system files in the appropriate drive letter, you can manually delete the system after installation; In addition, users can also be long-term preservation of these files on the hard disk , ready for use.

2, if the image-extracting file containing the corresponding letter inside, then the next time you reinstall the system again, simply select the appropriate drive letter directly in step two, it will prompt "installation image file already exists." Direct Select "Yes" can be used, without secondary decompression.

At this point, the installation Win10 Preview 9926 tutorial will introduce here. If you have any questions, and we welcome you home IT forum discussion, we will always pay attention to your problem.
Focus on Windows10 , locking Win10 home of ( http://win10.ithome.com )

Windows phone 8.1 update and news

Thursday 26 March 2015

Win10 preview official ISO 10041 system image download Daquan

Win10 preview version of the new installation, multi-system graphic tutorials